Table of Contents
Advertisement
48/69
Bosch Rexroth AG
Interfaces
7.1.7
G4 Display Interface
XIPC - G4 display interface
7.1.8
Combined Keyboard/Mouse Interface
XPS2KB – PS/2 Mini DIN keyboard/
mouse interface
7.1.9
Mouse Interface
XPS2MS – PS/2 mouse interface
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
NOTICE
Connect only USB devices that fulfill the USB specification. However, also USB
devices are commercially available that e.g., do not have the response times
specified in the USB specification.
The VDP is connected to the control cabinet PC (IPC) via the 25-pin G4 display
interface (XIPC). Connecting cables of different lengths are listed in the order‐
ing information, see
chapter 11.5 "Accessories" on page
NOTICE
The cables must not be plugged together for extension purposes, as this dam‐
ages the VDPs.
The combined keyboard/mouse interface (XPS2KB) allows to connect an ex‐
ternal keyboard/mouse. The data is transmitted via the G4 display interface to
the control cabinet PC.
PS/2 Mini DIN female connector, 6-pin
Cable length:
Cable type:
Fig.7-6:
Combined keyboard/mouse interface XPS2KB
XPS2KB
Keyboard Data
Mouse Data
5
6
GND
3
4
Power, DC +5V
2
1
Keyboard Clock
Mouse Clock
Shield
Fig.7-7:
Combined keyboard/mouse interface XPS2KB
The mouse interface (XPS2MS) can be connected to an external mouse. The
data is transmitted via the G4 display interface to the control cabinet PC.
PS/2 Mini DIN female connector, 6-pin
Cable length:
Cable type:
DOK-SUPPL*-VDP16/40/60-PR03-EN-P
The general function of non-specification-com‐
pliant USB devices can not be guaranteed,
even if they are functioning e.g. at the USB in‐
terface directly at the control cabinet PC.
Material damage due to cable extension!
1.5 m max.
Shielded, cross-section min. 0.14 mm
max 1.5 m
1
2
Keyboard
3
4
5
6
Shield above metallic
housing of the plug
1.5 m max.
Shielded, cross-section min. 0.14 mm
64.
2
2
Advertisement
Table of Contents
