Device Dismantling For Disposal; Opening Device; Disassembling Switch Panel - Bosch rexroth ctrlX HMI DE0015 Operating Manual

ctrlX HMI DE0015, DE0021
10.6

Device dismantling for disposal

10.6.1 Opening device

1. Remove the four screws of the back cover.
2. Remove the six screws of the interface cover.
3. Remove the four screws of the transport cover.
Fig. 23: Opening device

10.6.2 Disassembling switch panel

1. Remove the twelve screws of the switch panel.
2. Remove the two screws of the USB board.
3. Remove the three screws of the board of the E-STOP button.
4. Remove the six screws of the pushbutton board.
5. Rotate the four fastening rings to remove the pushbutton.
6. Remove the three screws of the USB rubber gasket.
R911405731, Edition 03
Device dismantling for disposal
1
33 / 52
2
3
Bosch Rexroth AG