Table of Contents
Advertisement
DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
6
Display and Operating Components
6.1
Backlight Switch-off
6.1.1
General Information
6.2
Operating and Error Displays
The service life of the backlight of the display is limited, see
Parts" on page
26.
To extend the service life of the LCD backlight, the flat screen display is provi‐
ded with a backlight switch-off. This function "darkens" the display if the display
has not been operated for a certain period of time. The length of the time interval
can be specified in the Windows Control Panel under "Power Options", see
6-1 "Setting the darkening mode of the display in the Windows Control Panel"
on page
37. You can reach the "Power Options" under Windows XP via:
Control panel Display Screen saver Power schemes Turn off monitor. Select
the required time from the list.
Fig.6-1:
Setting the darkening mode of the display in the Windows Control Panel
Four LEDs are provided in the upper part of the front panel to display the device
statuses and errors of the connected control cabinet PC (IPC). Start the meas‐
ures specified in the following table if one of the succeeding LEDs displays an
error or a note.
Bosch Rexroth AG
Display and Operating Components
chapter 4.5 "Wear
37/69
fig.
Advertisement
Table of Contents
