Table of Contents
Advertisement
ctrlX HMI DE0015, DE0021
1.
Press the "Home" key to open the On Screen menu.
2.
Press the "i" key to toggle to the menu item "Video Input".
3.
Press the "Home" key to confirm the selection to go to the "Video Input" menu.
4.
Press the "i" key to select the video interface to be used.
•
"DP" for display port (XDP)
•
"HDMI" for HDMI (XHDMI)
•
"RX" for CDI+rx (XCDI+rx)
5.
Press the "Home" key to confirm the selection.
6.
Press the "i" key to toggle to "Exit".
7.
Press the "Home" key to confirm the selection.
Upon delivery, the default value is "RX" for CDI+rx (XCDI+rx).
12.2.3 Touch
To set the touch (XCDI+rx, XDP, XHDMI), go to the On Screen menu under the menu item "Touch".
Fig. 33: On Screen menu – Touch
1.
Press the "Home" key to open the On Screen menu.
2.
Press the "i" key to toggle to the menu item Touch.
3.
Press the "Home" key to confirm the selection to go to the "Touch" menu.
4.
Press the "i" key to select different functionalities:
•
"Always Off" to disable the touch function
•
"Off for 60 sec" to disable the touch function for 60 seconds, e.g. for cleaning purposes
•
"Always On" to enable the touch
5.
Press the "Home" key to confirm the selection.
6.
Press the "i" key to toggle to "Exit".
7.
Press the "Home" key to confirm the selection.
If the touch function is disabled via "Always Off" or "Off for 60 sec", the status LED flashes
green on the front while it is disabled.
12.3
Operating and error display
A status LED is positioned in the lower area of the front plate.
R911405731, Edition 03
Brightness
Always Off
Video Input
Off for 60 sec
PIP
Always On
Touch
Exit
Exit
41 / 52
Operating and error display
Bosch Rexroth AG
Advertisement
Table of Contents
