This state displays the event and action of the Logic Controller. For further
information, see section Logic Controller.
The Bottom section always shows the state of the frequency converter in
Status mode.
Display Contrast Adjustment
▲
Press [status] and [
] for darker display
▼
Press [status] and [
] for brighter display
Indicator lights (LEDs):
If certain threshold values are exceeded, the alarm and/or warning LED lights up. A status and alarm text appear on the keypad.
The On LED is activated when the frequency converter receives power from mains voltage, a DC bus terminal, or the field installed external 24 V supply option
module (OPC24VPS). At the same time, the back light is on.