Siemens SINUMERIK 840Di Function Manual page 560

Basic machine

Hide thumbs Also See for SINUMERIK 840Di:

Table of Contents

Detailed Description

2.4 Program test

The skip function is selected via the operator interface in the "Program control" menu.

This selection sets interface signal:

DB21, ...DBX26.0 (skip block selected).

This does not activate the function. In addition, a slash "/" must be placed before the blocks

to be skipped.

This function is activated via interface signal:

DB21, ... DBX2.0 (activate skip block)

The "Skip part programs" function remains active during block searches.

Activated "Skip block" function is indicated by a reversal in the relevant field on the operator

Main program/subroutine

Skipping part program blocks

N40 and N50 during

Mode Group, Channel, Program Operation, Reset Response (K1)

Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0

Show Quick Links

Chapters

Table of Contents