Siemens SINUMERIK 840Di Function Manual page 990

Detailed description
2.11 Supplementary conditions and NC VAR selector
Processor
RAM (MB)
Hard disk,
free capacity (MB)
Interfaces
Graphics
Mouse
Operating system
The STEP7 package for the S7300 can be obtained and installed on equipment meeting the
above requirements in cases where the package has not already been supplied with the
programming device.
The following functions are possible with this package:
• Programming
• Parameterizing
• Testing and diagnostics (ONLINE)
2-78
– Editors and compilers for STL (complete scope of the language incl. SFB/SFC calls),
LAD, FBD
– Creation and editing of assignment lists (symbol editor)
– Data block editor
– Input and output of blocks ON/OFF line
– Insertion of modifications and additions ON and OFF line
– Transfer of blocks from programming device to the PLC and vice versa
– Parameterizing tool HW Config for CPU and I/O device parameterization
– Communication Configuration configuration tool for setting the CPU communication
parameters
– Output of system data such as hardware and software version, memory capacity, I/O
expansion/assignment
– Variable status/forcing (I/Os, flags, data block contents, etc.)
– Status of individual blocks
– Display of system states (ISTACK, BSTACK, system status list)
– Display of system messages
– PLC STOP/complete restart/overall reset triggering from the programming device
– Compress PLC
Minimum
80486
32
200
MPI incl. cable
Memory card
VGA or TIGA
yes
Windows 95/98/NT
STEP 7 and higher
Version 4
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Recommendation
Pentium
Or more
> 400
SVGA
Windows 95/98/NT
or higher
STEP 7 and higher
Version 5.1
Power Line Basic PLC Program (P3)