Siemens SINUMERIK 840Di Function Manual page 861

Number Identifier: $MC_
24000 FRAME_ADD_COMPONENTS
24002 CHBFRAME_RESET_MASK
24004 CHBFRAME_POWERON_MASK
24006 CHSFRAME_RESET_MASK
24007 CHSFRAME_RESET_CLEAR_MASK
24008 CHSFRAME_POWERON_MASK
24010 PFRAME_RESET_MODE
24020 FRAME_SUPPRESS_MODE
24030 FRAME_ACT_SET
24040 FRAME_ADAPT_MODE
24050 FRAME_SAA_MODE
24805 TRACYL_ROT_AX_FRAME_1
24855 TRACYL_ROT_AX_FRAME_2
24905 TRANSMIT_ROT_AX_FRAME_1
24955 TRANSMIT_ROT_AX_FRAME_2
28081 MM_NUM_BASE_FRAMES
28082 MM_SYSTEM_FRAME_FRAMES
28560 MM_SEARCH_RUN_RESTORE_MODE
5.1.4 Axis/spindle-specific machine data
Number Identifier: $MA_
32074 FRAME_OR_CORRPOS_NOTALLOWED
35000 SPIND_ASSIGN_TO_MACHAX
Axis Types, Coordinate Systems, Frames (K2)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Description
Separate programming/modification of additively
programmable frame components
RESET response of channelspecific basic frames
POWER ON response of channelspecific
basic frames
RESET response of channelspecific system frames
Clear system frames on RESET
Delete system frames on POWER ON
RESET mode for programmable frame
Positions for frame suppression
SZS coordinate system setting
Adapting active frames
Save and activate data management frames
Rotary axis offset TRACYL 1
Rotary axis offset TRACYL 2
Rotary axis offset TRANSMIT1
Rotary axis offset TRANSMIT2
Number of channel/specific Basic frames
Configuration screen form for channel-specific system
frames
Restore data after a simulation
(SW 7.1 and higher)
Description
FRAME or HL offset is not permitted
Assignment spindle to machine axis
Data Lists
5.1 Machine data
5-3