Siemens SINUMERIK 840D sl Function Manual page 608

K1: Mode group, channel, program operation, reset response
9.15 EES (optional)
MD10125 $MN_EES_NC_NAME = <NC name>
Note
Name of the NC unique throughout the system
To avoid access conflicts, the EES-specific name of the NC must be unique throughout the
system. The responsibility for this resides exclusively with the user/machine manufacturer.
When calling the program, only search for files with file ID
In order to speed up the program search for subprogram calls during EES operation, we
recommend that you limit the search to files with file ID (e.g. SPF, MPF, etc.).
MD11625 $MN_FILE_ONLY_WITH_EXTENSION = 1
Note
MD11625 has no effect on the program search when processing external subprograms with
EXTCALL.
Reference:
Description of the search path for the subprogram call, see the Programming Manual Job
Planning.
Only search for programs with interface in the cycle directories
In order to speed up the program search for subprogram calls during EES operation, we
recommend the search for subprograms which have created an interface description (by
means of PROC statement), and whose interface description was generated from the one of
the cycle directories (CUS, CMA, CST) be limited to the cycle directories:
MD11626 $MN_CYCLES_ONLY_IN_CYCDIR = 1
Note
MD11626 has no effect on subprograms whose interface was created using an EXTERNAL
declaration. A search is made in all program directories.
NOTICE
No search success for cycles outside the cycle directories
Cycles in the current directory and global subprogram directory are no longer found with the
setting MD11626 = 1!
Remedy: Always store cycles in the cycle directories.
608
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions