Siemens SINUMERIK 840D sl Function Manual page 536

K1: Mode group, channel, program operation, reset response
9.9 Program operation
the righthand side of the table, the number of the situation after the action has been carried
out is shown in brackets after each action.
Table 9-3 Responses to operator or program actions
Situation Channel sta‐
tus
R U A
1 x
2 x
3 x
4 x
5 x
6 x
7 x
8 x
9 x
10 x
11 x
12 x
13 x
14 x
15 x
16 x
17 x
18 x
Channel status
R --> aborted
U --> interrupted
A --> running
536
Program status
N U S W A
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Active mode Operator or program action (situation after the action)
A M J
x RESET (4)
x RESET (5)
x RESET (6)
x NC Start (13); Mode change (5 or 6)
x NC Start (14); Mode change (4 or 6)
x Direction key (15); Mode change (4 or 5)
x NC Start (14)
x NC Start (15)
x NC Start (13); Mode change (10 or 11)
x NC Start (16); Mode change (9 or 11)
x Direction key (17); Mode change (9 or 10)
x NC Start (13); Mode change (10 or 11)
x NC Stop (12)
x NC Stop (7); at block end (5)
x NC Stop (8); at JOG end (6)
x NC Stop (10); at block end (10)
x NC Stop (11); at JOG end (11)
x Reset (4); wait for other channel (18)
Program status
N --> aborted
U --> interrupted
S --> stopped
W --> waiting
A --> running
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Modes
A --> aborted
M --> aborted
J --> aborted
Basic Functions