Workpiece Coordinate System (Wcs) - Siemens SINUMERIK 840D sl Function Manual

Note
Display of the current coordinate system
When "Actual-value display in relation to the SZS" is active, the WCS is still displayed on the
HMI operator interface as the coordinate system to which the actual-value display relates.
Example
Actual-value display in relation to the WCS or SZS
Code (excerpt)
N10 X100
N20 X0
N30 $P_PFRAME = CTRANS(X,10)
N40 X100
10.4.7

Workpiece coordinate system (WCS)

Workpiece coordinate system (WCS)
The workpiece coordinate system (WCS) is the programming basis.
Figure 10-19 Programmable FRAME between SZS and WCS
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
K2: Axis Types, Coordinate Systems, Frames
10.4 Coordinate systems
Actual value display:
Axis X (WCS)
100
0
0
100
Actual value display:
Axis X (SZS)
100
0
10
110
703