Siemens SINUMERIK 840D sl Function Manual page 920

P3: Basic PLC program for SINUMERIK 840D sl
13.17 Block descriptions
Signal
OpKeyNum :
Op1KeyIn:
Op2KeyIn:
Op1KeyOut :
Op2KeyOut :
Op1KeyBusAdr :
Op2KeyBusAdr :
Op1KeyStop :
Op2KeyStop :
Op1KeyNotSend :
Op2KeyNotSend :
OpKeyBusType :
IdentMcpBusAdr :
IdentMcpProfilNo :
IdentMcpBusType :
IdentMcpStrobe :
MaxBAG:
MaxChan:
MaxAxis:
ActivChan:
ActivAxis:
UDInt :
UDHex:
UDReal :
IdentMcpType :
IdentMcpLengthIn :
IdentMcpLengthOut :
920
Typ Type
e
I INT
I POINTER
I POINTER
I INT
I BOOL
I BOOL
I BYTE
I INT
I BYTE
I BYTE
I BOOL
O INT
O INT
O INT
O ARRAY[1...10]
OF BOOL
O ARRAY [1..31]
OF BOOL
O INT
O INT
O INT
O BYTE
O BYTE
O BYTE
Value range
0, 1, 2
P#Ex.0
or
P#Mx.0
or
P#DBn.DBXx.0.
P#Ax.0
or
P#Mx.0
or
P#DBn.DBXx.0.
1, 2, 3 ... 191
0 (FALSE), 1 (TRUE)
0 (FALSE), 1 (TRUE)
b#16#55
1, 2, 3 ... 254
0, 1
b#16#5
0 (FALSE), 1 (TRUE)
1, 2, 3 ... 10
1, 2, 3 ... 10
1, 2, 3 ... 31
0 (FALSE), 1 (TRUE)
0 (FALSE), 1 (TRUE)
0,
---
---
0, B#16#80, B#16#81,
B#16#82 ... B#16#89
---
---
Description
Number of active direct control key mod‐
ules
0: No Ethernet direct control keys availa‐
ble.
Start address for the input signals of the
affected direct control key modules
Start address for the output signals of the
affected direct control key modules
Direct control keys via Ethernet: TCU in‐
dex:
0: Start transmission of direct control key
signals
1: Stop transmission of direct control key
signals
0: Send and receive operation activated
1: Receive direct control key signals only
Ethernet
only IE devices
Profile of a device
0: Complete device
1: Only direct control keys
only IE devices
1: Activate query
Number of mode groups
Number of channels
Number of axes
Bit string for active channels
Bit string for active axes
Quantity of INTEGER machine data in
DB20
Quantity of hexadecimal machine data in
DB20
Quantity of REAL machine data in DB20
MCP type
Length of MCP input data (MCP → PLC)
Length of MCP output data (PLC → MCP)
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions