Execution From External - Siemens SINUMERIK 840D sl Function Manual

K1: Mode group, channel, program operation, reset response
9.14 Program control
Original block:
N710 Y157.5 G42
N720 Z-67.5 RND=7.5
● With the EXECTAB command (processing a table of contour elements), the block
generated by EXECTAB is shown in the display block.
Original block:
N810 EXECTAB (KTAB[5])
● With the EXECSTRING command, the block generated via EXECSTRING is displayed in
the display block.
Original block:
N910 DEF STRING[40] PROGSTRING = "N905 M3 S1000 G94 Z100 F1000 G55"
N920 EXECSTRING(PROGSTRING)
Original block:
N905 Z100 G55 G94 M3 S1000 F1000
9.14.7

Execution from external

Function
The "execution from external source" function can be used to execute programs from an
external program memory that cannot be saved in the NC memory due to their size.
Note
Protected cycles (_CPF files) can not be executed from an external program memory.
598
Display block:
N710 Y157.5 G42
N720 Z-67.5 RND=7.5
Display block:
N810 G01 X46.147 Z-25.38
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions