Advertisement
30
SICAM Q80 7KG8080
5.1.2.1.2 Create a parameter set
Creating a new parameter set
Select the menu item Parameter Set/ New, click on the symbol
Topology
. To avoid name conflicts or errors in assigning measurement locations, it is recommended that you
21
create new measurement tasks using the
A wizard leads you through various dialogs for entering the required names and, if appropriate, for changing the data
storage location.
3. Entry of an name of the measurement task
By clicking on Finish, a new configuration is created with the default settings.
If an existing measurement task is to be applied to a different measurement location and a different device:
a. Load the existing settings
b. Select Template/Save as...
c. Select another device
d. Open the saved template with Template / load...
e. Save as new parameter setThe storage of data is organized according to the following principle:
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Topology
.
21
4. Summary of entries
in the toolbar or use the
context menu in the
Advertisement
