Advertisement
218
SICAM Q80 7KG8080
7.1.3.9
Instructions for setting up a PPP-device
1. PC Control panel -> call network
a. install TCP/IP Dial-Up adapter
b. set IP-address properties if no DNS-server is available
i. IP
192.168.12.1
ii. Sub
255.255.255.0
c. otherwise, configure DNS (normally, this has already been done)
i. Host name: name; domain: siemens.siemens-berlin.de
ii. search order: add 192.168.11.1 to list
iii. Domain siemens.siemens-berlin.de
2. Creating a Dial-Up network (My Computer
a. General
i. phone number
ii. select modem
1. General
a. configuration of COM connection
b. maximum speed 115200
2. Settings: Standard
3. Options: Standard
b. Server types (win9x)
i. Type: PPP
ii. Options TCP/IP
1. TCP/IP settings
a. permanently set 192.168.12.12
iii. Script: Standard
iv.Multilink: Standard
3. Call TCPIP-Config ( from the SICAM Q80 7KG8080 program group)
a. Search
b. Choose device and call PPP settings
c. IP-Address
i. Set local address e.g. 192.168.12.13
ii. Remote IP doesn't matter
iii. Username & password if necessary
iv.Script
1. Default
2. GSM
Send ATZ\r
Pause 1
Send AT+CPIN=XXXX\r
Pause 20
Send ATS0=1 \r
Pause 1
Signal lcp open
v. Hardware: Default: 38400; Hardware
d. Write to device
4. Physically construct modem line
5. Set up Dial-Up connection
6. If the connection is established, start SICAM Q80 Manager-software
a. Choose
device
b. Choose network settings
c. Click TCP/IP
d. Activate host address (in this example: 192.168.12.12)
e. Let's go...
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
don't change anything
edit
21
Dial-Up network)
Advertisement
