Advertisement
174
SICAM Q80 7KG8080
6.3.4
Extras menu
6.3.4.1
Options
Dialog for setting a variety of basic options which need not be set for each measurement separately. Total overview of
the parameter ranges which are explained in detail further below.
All settings changed are applied in the configuration when the dialog is closed or after pressing the button Apply.
6.3.4.1.1 Options - Folders
Measurement data path: Folder for storing the measured data. This path can also be changed when setting up a
new measurement task. If many measurement devices are connected, ensure that there is adequate free memory
on this drive, for instance by selecting a data server.
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
Check Settings:
Plausibility check of the current fill-out form's settings. All parameters are checked.
Faulty entries are indicated in a messaged. Mainly used in configuring a
measurement.
Folders:
All folders required for the program.
Measured data path:
Storage area for measured data.
Analysis database:
Database to which the analysis results are saved.
Inrush data path:
Storage area for the test measurement data.
Export of data, reports to:
Storage area for reports and exported data.
For the purpose of gaining familiarity with the program, a sample
measurement was included with the installation, which can be accessed by
means of the button Set example data.
Advertisement
