Advertisement
Measurement device
o Active measure point: Activated in
o Device name: Measurement device associated with the measurement location
o Input: Analog inputs. For devices having 8 voltage inputs: U1..U4; U5..U8, otherwise U/I
Last used parameter sets
o Edited: Name of the last parameter set edited
o Send to device: Name of the last parameter set sent.
o Time: Time of the last parameter set sent.
o Autostart: Last parameter set loaded as autostart
o Initialise time: Time of last parameter set loaded to the device as autostart.
Evaluation
o Data transfer: Name of the feeder and of the parameter set belonging to the last data transferred from the
device.
o Data transfer: Time of last transfer
o Network quality: Name of the branch and of the parameter set
o Measurement time: Start and end of the measurement
o Status: Indicates whether evaluation requirements are met: pass or fail
In normal operation, the names of the parameter sets shown here are all the same.
Differences appear when you have new parameter sets or if the measurement location was moved within the
topology.
5.1.1.2.2 Toolbar at right edge
The toolbar on the right edge enables saving and loading of the device list and topology:
Saves device list and topology
Saves the following current settings in a folder to be selected by the user (default folder = output
path)
Device list
the last parameter set edited for each device
Topology
The following subfolder is created in the selected folder:
Loads device list and topology
Loads saved settings
selection of items to be loaded:
5.1.1.2.3 Defining a new region, station or voltage level
In the context menu, the only entry ever active is the one which can be performed in conjunction with the current
selection. For example, for the station selected, only one new subordinate voltage level can be defined.
Topology
<Date Time> TopologyExport
E.g. "2012-12-03 10_14_34 TopologyExport"
Device list – complete replacement or only loading of entries not present
Parameter sets (overwriting of configurations present)
Topology – complete replacement oror only loading of entries not present
Operation modes and settings
25
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
27
Advertisement
