Advertisement
108
SICAM Q80 7KG8080
If the extra information could not be found, this is indicated by asterisks around the measurement task
name:
*not SICAM Q80 7KG8080*
*unkown_place*
*unkown_Exp*
5.1.4.1
Varieties of data import
1. Automatic data import: Preferred variety, stationary operation with fixed settings; the easiest option for multiple
devices.
2. Manual import of measurement device: Targeted retrieval of specific measured values; device not always
accessible.
3. Import of data retrieved from the device CF-Card: E.g. manual retrieval of on-site data after temporary
deployment at various measurement locations.
4. Data import from a different SICAM Q80 Manager: By importing the data from the PC's data storage folder
Adoption of measured data originating from an outside SICAM Q80, data transfer for evaluation or Support
This is the variety recommended for transferring the device definitions file.
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
*auto*
*not ready*
data don't come from SICAM Q80 7KG8080 !
data which were automatically recorded when the device was
started, but don't belong to any measurement task
measurement not finished yet -> data transfer not possible
couldn't find info about measurement start
measurement task info not present
Advertisement
