Advertisement
106
SICAM Q80 7KG8080
5.1.4
Manual data transfer
This dialog enables you to conveniently manual transfer of data from the measurement device to the PC, if not set
automatically
. Once the data have been transferred, they are available in the measurement database and can be
142
investigated in the
evaluation
The program
Auto-Transfer
Use Select device... to specify the desired SICAM Q80 7KG8080 unit if you have multiple devices in your
communication network. If you make a change, you exit the current parameter set's context menu and are
prompted to save (if necessary). Subsequently, a default standard parameter set is loaded which is then
displayed in the title bar.
Clicking on Search hard disk to read out the contents of the selected measurement device's hard drive. The
function initially starts with a search window while the software prepares a list of all data present on the device
hard drive. The measurement's Location, measurement task name, Start time and End are indicated.
If you wish to read-in the data stored on the Compact Flashcard inside a laptop slot, for example, select Search
PC.
Next. the following options are available:
Selecting data to transfer: By dragging the entries for data from the upper list to the lower list, data from the
source is transferred to the target. Alternatively, select the desired entries to highlight them and click the button
. If the option Load transferred data configuration is active, the configuration values for this measurement are
automatically set after the transfer, so that you can go directly to the evaluation page.
Deleting data: Highlight the data to be deleted in the upper list and then click Delete.
Power Quality Recorder SICAM Q80 7KG8080, System manual
E50417-H1076-C420-A2, Release 12.01.2015
or in the
channel search
109
independently performs the data transfer along with the
148
Data transfer selection window
.
133
evaluation
.
109
Advertisement
