Table 691 Mirror-Dest Command; Mirror Configuration Commands - Nokia 7302 Manual

Mirror Services
8.7.2
8.7.2.1
Table 691
618

Mirror Configuration Commands

mirror-dest
mirror-dest command
Item Description
Syntax mirror-dest service-id
no mirror-dest
Context configure>mirror
Description This command creates a context to set up a service that is intended for packet mirroring. It is
configured as a service to allow mirrored packets to be directed locally (within the same router).
The mirror-dest service is comprised of destination parameters that define where the mirrored
packets are to be sent. It also specifies whether the defined service-id will receive mirrored
packets from far end ISAM devices over the network core.
The mirror-dest service IDs are persistent between boots of the router and are included in the
configuration saves. The local sources of mirrored packets for the service ID are defined within
the debug mirror-source command that references the same service-id. One mirror-dest
service ID can be created within a single system.
The mirror-dest command is used to create or edit a service ID for mirroring purposes. If the
service-id does not exist within the context of all defined services, the mirror-dest service is
created and the context of the CLI is changed to that service ID. If the service-id exists within
the context of defined mirror-dest services, the CLI context is changed for editing parameters
on that service ID. If the service-id exists within the context of another service type, an error
message is returned and CLI context is not changed from the current context.
The no form of the command removes a mirror destination from the system. The
mirror-source associations with the mirror-dest service-id do not need to be removed or
shutdown first. The mirror-dest service-id must be shutdown before the service ID can be
removed. When the service ID is removed, all mirror-source commands that have the service
ID defined will also be removed from the system.
Default No packet mirroring services are defined.
Parameters service-id - The service identification identifies the service in the service domain. This ID is
unique to this service and cannot be used by any other service, regardless of service type. The
same service ID must be configured on every ISAM router that this particular service is defined
on.
If particular a service ID already exists for a service, then the same value cannot be used to
create a mirror destination service ID with the same value.
For example:
If an IES service-ID 13 exists, then a mirror destination service-ID 13 cannot be created.
Values: 1 — 2147483648
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13