Table 282 Querier Command Output Fields; Table 283 Static Command; Static - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
Table 282
5.16.8.6
Table 283
(1 of 2)
Issue: 13
Querier Command Output Fields
Label Description
SAP Id Specifies the SAP ID of the service.
IP address Specifies the IP address of the querier.
Expires The time left, in seconds, that the query will expire.
Up time The length of time the query has been enabled.
Version The configured version of IGMP.
General Query The frequency at which host-query packets are transmitted.
Interval
Query Response The time to wait to receive a response to the host-query message from the host.
Interval
Robust Count Specifies the value used to calculate several IGMP message intervals.

static

static command
Item Description
Syntax static [sap sap-id]
Context show>service>id>igmp-snooping
Description This command displays information on static IGMP snooping source groups for the v-VPLS
service.
This command displays both the SAP level static and service level static group information.
SAP level static groups equal service level static groups plus individual SAP level static
groups..
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
337