Vpls Sap Configuration Example - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.8.4.2
To configure a local VPLS service, enter the sap sap-id command twice with different
port IDs in the same service configuration.
configure service vpls <service-id> sap {<port-id> | <lag-id>}:<vlan-id>
create
The following CLI command syntax to create or modify an SAP:
configure service vpls <service-id> sap {<port-id> | <lag-id>}:<vlan-id>
create
The port or LAG is specified in the following format:
•
•
The VLAN ID must match the VLAN ID of the associated service as follows:
•
•
•
The following example displays SAPs configured for an m-VPLS:
*A:ALA-1>configure>service# info
----------------------------------------------
...
----------------------------------------------
*A:ALA-1>configure>service#
To configure a distributed VPLS service, you must configure service entities on
originating and far-end nodes. You must use the same service ID on all ends (for
example, create a VPLS service ID 9000 on ALA-1, ALA-2, and ALA-3). A distributed
VPLS consists of an SAP on each participating node and an SDP bound to each
participating node.
Issue: 13

VPLS SAP configuration example

Network (regular) ports: <slot>:<type of port>:<faceplate sequential number>.
LT (residential or user) ports: lt:<rack>/<shelf>/<sequential number of the line
board>
For an m-VPLS SAP, "no-tag" is used for the externally untagged L2CP frames
processed by the m-VPLS
For a v-VPLS SAP, the VLAN ID must be explicitly specified.
For a VPLS there are no restrictions, that is, SAPs of a VPLS can have a different
VLAN ID. The only restriction is that a VLAN ID of a V-VPLS cannot be used.
vpls 1 customer 1 create
description "Local m-VPLS"
stp
shutdown
exit
sap nt-a:sfp:2 create
description "SAP for RSTP service"
exit
sap nt-a:sfp:5 create
description "SAP for RSTP service"
exit
no shutdown
exit
The following example displays configuration of distributed VPLS SAPs:
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
203