FD 100/320Gbps NT and FX NT IHub Services Guide
7.10.6.11
Table 475
7.10.6.12
Table 476
7.10.6.13
Table 477
(1 of 2)
Issue: 13
source-address
source-address command
Item
Description
Syntax
source-address ipv6-address
no source-address
Context
configure>service>vprn>interface>ipv6>dhcp6-relay
Description
This commandspecifies a source IPv6 address which will bthe e used as source IPv6 address
in all the relayed DHCPv6 messages. By default all DHCPv6 relay messages will use the
outgoing interface IPv6 address as source address.
A maximum of 8 DHCP servers can be configured.
Default
no source-address
Parameters
ipv6-address — Specify the source IPv6 address.
icmp6
icmp6 command
Item
Description
Syntax
icmp6
Context
configure>service>vprn>interface>ipv6
Description
This command configures ICMPv6 for the interface.
packet-too-big
packet-too-big command
Item
Description
Syntax
packet-too-big [number seconds]
no packet-too-big
Context
configure>service>vprn>interface>ipv6>icmp6
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
487