Table 428 Preferred-Lifetime Command; Table 429 Valid-Lifetime Command; Preferred-Lifetime - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
7.10.2.18
Table 428
7.10.2.19
Table 429
Issue: 13

preferred-lifetime

preferred-lifetime command
Item Description
Syntax [no] preferred-lifetime {seconds | infinite}
Context configure>service>vprn>router-advertisement>interface>prefix
Description This command configures the remaining length of time in seconds that this prefix will continue
to be preferred, such as, time until deprecation. The address generated from a deprecated
prefix should not be used as a source address in new communications, but packets received
on such an interface are processed as expected.
Default 604800
Parameter seconds — Specifies the remaining length of time in seconds that this prefix will continue to be
preferred.
Values: 0 — 4294967294
infinite — Specifies that the prefix will always be preferred. A value of 4,294,967,295 or above
represents infinity.
valid-lifetime
valid-lifetime command
Item Description
Syntax [no] valid-lifetime {seconds | infinite}
Context configure>service>vprn>router-advertisement>interface>prefix
Description This command specifies the length of time in seconds that the prefix is valid for the purpose of
onlink determination. A value of all one bits (0xffffffff) represents infinity. The address
generated from an invalidated prefix should not appear as the destination or source address
of a packet.
Default 2592000
Parameter seconds — Specifies the remaining length of time in seconds that this prefix will continue to be
preferred.
Values: 0 — 4294967294
infinite — Specifies that the prefix will always be preferred. A value of 4,294,967,295 or above
represents infinity.
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
459