Samsung CLX-9350ND Service Manual page 477

● Code :
U3-3111
U3-3113
U3-3114
● Symptom / Cause :
During a DADF job, the document on stacker does no
normal time.
● Troubleshooting method :
1. Check if the DADF pick up motor is working.
2. Open the DADF cover.
3. Remove the document on the Guide-Pick up Assy.
4. Check if there is any contamination on surface of pi
Clean or replace the contaminated roller.
(Refer to maintenance chapter)
5. Check if the one-way bearing is assembled correctl
The letter should be shown in external.
6. Find some obstruction in feeding path.
7. Close the DADF cover.
● Replacement part ● Replacement part
- JC97-03779A : DADF Pick up/ ADF Roller
- JC97-03630A : DADF Retard Roller
Service Manual
CLX-9250/9350 series
7. Troubles shooting
● Error message :
:
Original paper jam in n front of scanner
Original paper jam in n front of scanner
Original paper jam in n front of scanner
ot feed or doesn't reach the feed sensor within a
ick-up / ADF / Retard roller.
ly.
7-1 37
SAMSUNG ELECTRONICS