Video Controller - Samsung CLX-9350ND Service Manual

3.7.3 Video controller PBA
Perform the following procedure to remove the Video C
1. Remove the Rear cover and Rear shield.
2. Take off the Top Slot [A] after removing 5 screws.
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3. Take off the Bottom Slot [B] after removing 2
screws.
[B]
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
Controller PBA from the printer.
4. Take off the video controller after removing 8
screws and all connectors. scre s and all connectors
CAUTION
When replacing the Video board, you must
insert the MSOK and Memory on the new video
PBA.
3-5 58
MSOK
SAMSUNG ELECTRONICS