3.7 Electrical components
This section contains the procedures for disassemblin
3.7.1 Engine controller
Perform the following procedure to remove the Engine
1. Remove the rear upper cover [A] after removing 7 sc
[A]
2. Slightly release 6 screws. It is not necessary to rem
Move the rear shield [B] in the direction of the yellow a
M
th
hi ld [B] i th di
Service Manual
CLX-9250/9350 series
3. Replacemen
nt Procedures
g the electrical components of the printer.
Controller PBA from the printer.
crews.
move the screw completely.
ti
f th
ll
arrow and remove it.
[ ]
[B]
3-5
56
d
it
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Sensitive
Devices
SAMSUNG ELECTRONICS