Lamp - Samsung CLX-9350ND Service Manual

3.4.3 Lamp

Perform the following procedure to remove the Lamp
To replace the lamp, you must first remove the scan g
1. Remove the 3 screws.
2. Remove the connector cover [A]. Remove 1 screw
3. Remove 2 screws.
Service Manual
CLX-9250/9350 series
3. Replacemen
[B]
nt Procedures
from the Scan Unit.
glass (3.4.1).
w (ground harness). And unplug the connector.
[A]
4. Remove the rear cover [B] by slightly lifting up
and push back.
3-1 17
[B]
SAMSUNG ELECTRONICS