Lift Motor - Samsung CLX-9350ND Service Manual

3.7.10 Lift motor

Perform the following procedure to remove the 2 Lift Mo
1. Remove the HVPS board (front). (refer to 3.7.9)
2. There are 2 identical lift motors. To remove a lift mot 2 There are 2 identical lift motors To remove a lift mot
3.7.11 SMPS PBA
Perform the following procedure to remove the MPS P
1. Remove the rear cover. (refer to 3.2.4)
2. Remove the 6 screws from the SMPS box.
Service Manual
CLX-9250/9350 series
3. Replacemen nt Procedures
otors from the printer.
or, remove 3 screws and 1 connector. or remove 3 screws and 1 connector
PBA from the printer.
3. Take off the SMPS board after removing 7
screws and all connectors.
3-6 66
SAMSUNG ELECTRONICS