Sony MVS-6520 User Manual page 428

Symbol
AuxXpt
MEAutoTransition
MECut
KeyAutoTransition
KeyCut
Play
Cue
426
Macro File Editing Rules
Parameter name Arguments
AuxBus? EditPreview, AUX1 to AUX24,
FrameMemory1,
FrameMemory2,
DME1Video to DME8Video,
DME1Key to DME8Key,
DME1Video2nd to
DME8Video2nd (a),
DME1Key2nd to
DME8Key2nd (b)
Xpt? 1 to 300
VideoKey? Video, Key
ME? ME1, PP
Time? Current (a), 0 to 999
ABusXpt? Current (a), 1 to 300
BBusXpt? Current (a), 1 to 300
ME? ME1, PP
ME? ME1, PP
Key? Key1 to Key4
Time? Current (a), 0 to 999
Direction? ToOn (a), ToOff (b), Any (c)
ME? ME1, PP
Key? Key1 to Key4
Direction? ToOn (a), ToOff (b), Any (c)
Device? 1 to 12, FrameMemory1Clip to
FrameMemory8Clip
Mode? Normal (a),
Recue (b),
Loop (c)
Device? 1 to 12, FrameMemory1Clip to
FrameMemory8Clip
Timecode? Current (a), hh:mm:ss:ff
Description
Applicable AUX bus
(a): DMEnVideo2nd= Bus for selecting back
video signal of DMEn channel (n=1 to 8),
(b): DMEnKey2nd= Bus for selecting back key
signal of DMEn channel (n=1 to 8)
Main table cross-point button number set in the
Xpt Assign menu
Signal type selected on the applicable bus
(video signal or key signal)
Control blocks on the applicable bank
Transition rate (number of frames)
(a): Mode in which the current value set on the
transition control block is used
A bus or B bus cross-point button number. Use
the button number of the main table set in the
Xpt Assign menu.
(a): Mode in which the cross-point number set
for the current A bus or B bus is used
Control blocks on the applicable bank
Control blocks on the applicable bank
Key of the applicable independent key transition
Transition rate (number of frames)
(a): Mode in which the current value set on the
independent key transition is used
Transition execution mode
(a): Key is inserted
(b): Key is deleted
(c): Transition is always executed
Control blocks on the applicable bank
Key of the applicable independent key transition
Transition execution mode
(a): Key is inserted
(b): Key is deleted
(c): Transition is always executed
Applicable device
Playback mode
(a): Normal mode
As for Frame Memory 1 Clip to Frame Memory
8 Clip, settings are ignored and operation mode
is fixed to "Normal."
(b): Recue mode
(c): Loop mode
Applicable device
Start point timecode
hh=hours (00 to 23)
As for Frame Memory 1 Clip to Frame Memory
8 Clip, hh is fixed to "01."
mm=minutes (00 to 59)
ss=seconds (00 to 59)
ff=frames (00 to 29)
(a): Mode in which the currently set timecode is
used