Sony MVS-6520 User Manual page 330

assign the same signal to another button number at the
same time. Further, you can delete currently assigned
signals from the main table.
1
In the Engineering Setup >Panel >Xpt Assign menu
(7322) or Engineering Setup >Panel >Xpt Assign
>Table Button Assign menu (7322.1), press [Main, V/
K Pair Assign].
The Main, V/K Pair Assign menu (7322.5) appears.
The left of the status area shows the video and key
signal names, source number, and audio mixer cross-
points (machine numbers) currently assigned in the
main table. On the right is a list of the source numbers
and signals that can be assigned. When the shift button
is pressed, the number column is distinguished by
color.
For details about audio mixer cross-point assignment
1 "Setting the audio mixer cross-points"
operations,
(p. 332).
2
Select the button number.
3
When assigning a video signal, press [Video] in the
<Assign> group. When assigning a key signal, press
[Key]. (You can select a video signal and a key signal
at the same time.)
Notes
[Video] and [Key] in the <Assign> group cannot be
turned off at the same time. One or the other is always
on.
4
Select the signal.
5
Using the buttons in the <Xpt Assign> group, assign
the selected signal to the button number currently
selected in the main table.
Set: Deletes the signal currently assigned to the
selected button number and makes a new
assignment.
Insert: Moves the signal currently assigned to the
selected button number to the next number, and
makes a new assignment.
Notes
When a button number above 121 is selected,
execution of [Insert] is impossible. If an [Insert]
execution attempts to change a signal assignment to a
button number above 121, the signal assigned to 120 is
automatically deleted while signal assignments to 121
and above are maintained.
To disable a button
Select the button you want to disable, and press [Inhibit].
330
Cross-Point Settings
To delete an assigned signal
Select the button for the signal you want to delete, and
press [Delete] in the <Xpt Assign> group.
Signal deletion is executed in accordance with the
selection in the <Assign> group, and the signal assigned to
the button number next to the selected button number
moves up one line.
Notes
When a button number above 121 is selected, execution of
[Delete] is impossible.
If [Delete] execution attempts to change a signal
assignment to a button number above 121, the move ends
when the signal assigned to 120 moves to 119, and the
signals assigned to numbers 121 and above are maintained.
Creating tables 1 to 14
When creating tables 1 to 14, in the same way as when
creating the main table, you can assign the same signal to
more than one button number, or delete currently assigned
signals. However, assignment of video and key
combinations is impossible.
1
In the Engineering Setup >Panel >Xpt Assign menu
(7322), press [Table Button Assign].
The Table Button Assign menu (7322.1) appears.
The table number appears on the upper left part of the
status area.
The left part of the status area shows the cross-point
button numbers, video and key pair numbers, video
signal source names and source numbers, and key
signal source names and source numbers. When the
shift button is pressed, the number column is
distinguished by color.
The right part shows the video and key pair numbers,
and the names of video signals and key signals set in
the main table.
The Table Button Assign menu also allows you to
access the Main, V/K Pair Assign menu and the Src
Name/Src Color menu.
2
Select the table number.
No. Parameter Adjustment
1 Table No Selection of the table to be set
3
Select the button number.
4
Select the pair number.
5
Using the buttons in the <Button Assign> group,
assign the selected pair number to the button number
currently selected in table 1.