Sony MVS-6520 User Manual page 248

Region selection buttons
Pressing the [MORE] button or the [EXIT] button in the
memory recall section restores the memory recall section
to the previous screen.
Recalling a register from the Flexi Pad
EFF button
Region selection buttons
1
In the Flexi Pad, press the [EFF] button, turning it on.
2
Press the button corresponding to the region you want
to select, turning it on.
You can select more than one button.
[M/E1], [P/P]: Selects the M/E-1 and PGM/PST
regions, respectively.
[USER1] to [USER8]: Selects the User regions.
[DME1], [DME2], [DME5] to [DME8]: Selects the
DME channels.
[PBUS]: Selects P-Bus.
[GPI]: Selects GPI.
[MCRO]: Selects Macro.
[DEV1] to [DEV12]: Selects devices.
[ALL]: Selects all regions.
248
Recalling a Register
Memory recall section
Alphanumeric display
Memory recall section
[MSTR]: Selects the master timeline
and Saving a Master Timeline in the Flexi Pad"
(p. 262)).
For details about the method of region selection,
1 "Selecting regions in the Flexi Pad" (p.
Notes
The regions that can be selected simultaneously are
those assigned to the region selection buttons and the
memory recall section buttons
When [MSTR] and other regions are selected
simultaneously, the master timeline takes precedence.
The first button pressed is lit green as the reference
region. Subsequently pressed buttons turn amber for
the region select buttons and yellow for the memory
recall section buttons.
Pressing one of the amber or yellow lit buttons, while
holding down the [EFF] button, turns the button green
to indicate its corresponding region as the new
reference region.
For details about the precedence order for becoming
1 "Reference region" (p.
the reference region,
The alphanumeric display shows the name of the
reference region and the number of the register
previously recalled for that region.
3
Enter the number of the register to be recalled with the
numeric keypad buttons.
To search for an empty register, instead of entering a
number, press the [.] (period) button. To search for an
empty register common to all currently selectable
regions, press the [.] button again.
To search for an empty register in the 100 range, press
[1], [0], [0], [.] (period) in this order.
To search for an empty register in the 200 range, press
[2], [0], [0], [.] (period) in that order.
The entered register number or corresponding register
number appears in the alphanumeric display. If the
number is followed by a letter "e" or "E," this indicates
the following.
e: Indicates the selected register is empty for the
regions selected in step 2.
E: Indicates that the corresponding register is empty in
all selectable regions.
4
Press the [ENTR] button.
This recalls the specified register.
When the master timeline is recalled, the region
selection buttons light according to the saved region
information.
(1 "Creating
247).
(1 p. 327).
239).