HP 4200 User Manual page 68

CAUTION: To prevent possible file corruption on the appliance, do not simply disconnect the
power cord.
3. Turn on the appliance again by pressing the Power button.
4. During the restart sequence, when the front panel display reads "Configuring," press
message is displayed:
5. Press to reset the appliance to its factory defaults. Press
all current configuration information. The appliance will then finish restarting.
If was pressed and the factory default settings are being restored, the following message will be
displayed during restart:
System Messages for Restarting the Appliance
Restarting (or Rebooting) the Appliance
Use the Restart Appliance feature to reboot the appliance. Before restarting the appliance, read the following:
The restart process will take from three to six minutes. During this time, the appliance is not available
for use and the connection to this browser session may be lost.
Any print jobs actively being spooled from client users to the appliance will probably be lost and must
be reprinted.
Any print jobs currently spooled on the appliance will be retained.
Any print jobs currently being de-spooled from the appliance to the printers may be restarted
(automatically) once the appliance is ready to function.
Follow these steps to restart the appliance:
1. Under General on the menu, click "Restart Appliance".
2. Click
Upgrading the Firmware on the Appliance
Before installing an upgrade, save the current configuration of the appliance using the
CAUTION: This information should be automatically saved on the appliance, but if a catastrophic event occurs
during the upgrade (for example, a power failure), it is possible that the configuration may be lost. This step is
precautionary.
Note: If migrating to firmware version 2.3.xx, printers that had been added to earlier firmware versions (2.2.x
or before) need to be associated with their driver again. To do this easily, go to the Printers page, click
to begin the reboot process.
to cancel the restart process and retain
Backup Settings
. The following
feature.
for