HP 4200 User Manual page 47

the firmware is upgraded to ensure proper driver performance. Even if the driver was working on the older version of
firmware (2.2.xx), it is recommended that you initialize the driver after the firmware is upgraded. Go to the Printers
page and click for that printer. Then select Drivers. In the drop-down list, select the default printer driver (HP
LaserJet 4) and click
initialized you will be prompted to initialize it. This will need to be done on a printer-by-printer basis.
Once a driver has been initialized, it will not have to be initialized again. But, each printer associated with that driver
will need to be re-associated with the driver in order for the initialized settings to take effect. After a printer has been
re-associated with an initialized driver, all driver configuration settings for that printer will need to be reset.
Field Name
Printer Name
Client Printer Driver
. Then, select the original driver and click
Printer Properties - Drivers Page
Description
Name of the printer as entered in the Printer Name field on the Add Printer page in the
web interface. This name is displayed in Network Neighborhood as an available printer
configured on the appliance.
Displays all printer drivers added to the appliance, and highlights the driver currently
associated with the specified printer. To change the driver for the printer, highlight a
different driver and click
again. If this driver has not been
.