HP 4200 User Manual page 129

page, the security settings may have changed. Verify that the user has authority to print.
This can be done from the web interface by selecting Printers --> Printer Property Page
--> Security.
By default, the group "Everyone" has permission to print. If "Everyone" does not have
permission to print, add either the specific user, or a group to which the user belongs. The
group "Everyone" normally contains all the users.
Monitor the log file for additional unauthorized access attempts.
Cannot communicate with WINS server (209)
Level: Critical Error
Category: Networking
Description: The WINS server specified on the
experienced one of the following conditions:
network problems (cable malfunction, hub, or router problems)
not on the network
the IP address or hostname specified is not a domain controller
power is disconnected or interrupted
Action:
Retype the WINS server address in the xxx.xxx.xxx.xxx format on Microsoft Networking
Settings page and try again.
A properly configured WINS server is essential for the proper operation of the appliance.
If the appliance cannot reach the WINS server, users on other subnets (on the other side
of a router) will not be able to see the appliance in Network Neighborhood.
If the DNS server, WINS server, or Domain Controller is not on the same subnet as the
appliance, ensure that the TCP/IP configurations, as entered on the
Settings page
infrastructure, such as the default gateway, is configured and is operational.
Failed WINS name resolution (210)
Level: Critical Error
Category: Networking
Description: The appliance could communicate with the WINS server but could not resolve the
name. A properly configured WINS server is essential for the proper operation of the appliance.
If the appliance cannot use the WINS server to resolve IP addresses, it will not be able to
communicate with the device.
Action: The NT Domain Name might have been misspelled on the
page.
Make sure the network has a WINS server configured and the WINS server address on the
in the web interface, are configured correctly and that the network
Microsoft Networking Settings page
Microsoft Network Settings
TCP/IP Network