Table of Contents
Advertisement
During copying between SD cards
Display
Use destination SD card
formatted with same as
source SD card.
CANNOT COPY.
Exceeds capacity. Please
reselect.
This clip cannot be
copied.
Cannot copy: contains
recordings from other
devices.
CANNOT SELECT BY
DATE ANY MORE.
CANNOT COPY - DATE
CAPACITY IS FULL.
CANNOT COPY
- THE NUMBER OF CLIPS
HAS REACHED
MAXIMUM.
Could not copy some
clips.
COPY FAILED. PLEASE
CHECK THE CARD.
COPY FAILED DUE TO
ERROR ON SD CARD.
CARD LOCKED.
Description
This is displayed when the SD card format
*
(FAT32/exFAT)
differs between the SD
card of the copy source and that of the
copy destination.
* FAT32 is a format used for SDHC
memory cards. exFAT is a format used
for SDXC memory cards.
This is displayed when the system
frequency (59.94 Hz/50.00 Hz) of AVCHD
clips differs between those recorded on
the SD card of the copy source and those
recorded on the SD card of the copy
destination.
(AVCHD clips with different system
frequencies cannot be recorded to the
same media.)
There is not enough space on the SD
card.
This is displayed when one or more of the
clips you are trying to copy cannot be
played back on this unit.
This is displayed when a copy-related
operation involving a clip recorded with
another device is performed.
This is displayed when no more clips can
be selected after the maximum limit is
reached, for example.
This is displayed when no more clips can
be copied after the maximum limit set by
applicable standards is reached, for
example.
This is displayed when some clips cannot
be copied after the maximum limit set by
applicable standards is reached, for
example.
An error has occurred while accessing the
SD card.
This is displayed when an attempt to
access the SD card in this unit fails.
The write-protect switch of the copy
destination SD card is locked.
≥ Check the format of the SD card of the
copy destination.
≥ Copy the AVCHD clips to a recordable
SD card. Use an SD card containing
clips with the same system frequency.
≥ Replace the SD card of the copy
destination or delete unnecessary clips.
≥ Copy clips except for the ones that
cannot be copied.
≥ Copy only the clips recorded with this
unit.
≥ After finishing copying, reselect the
desired dates.
≥ Use an SD card with enough recordable
space.
≥ Check the SD card.
≥ Unlock the write-protect switch of the
SD card.
- 236 -
Behavior and cause
Advertisement
Table of Contents
