Table of Contents
Advertisement
[ZEBRA DETECT 1]
Selects the brightness level of the left-leaning zebra patterns on the screen.
1
Touch [ZEBRA DETECT 1].
≥ Touch [YES].
2
Touch
/
to adjust settings.
≥ You can select a value between 50% and 105%.
3
Touch [EXIT] to complete the setting.
≥ This function's default setting is "80%".
[ZEBRA DETECT 2]
Selects the brightness level of the right-leaning zebra patterns on the screen.
[SET]/[OFF]
1
Touch [ZEBRA DETECT 2].
≥ Touch [SET].
2
Touch
/
to adjust settings.
≥ You can select a value between 50% and 105%.
3
Touch [EXIT] to complete the setting.
≥ You can display [ ZEBRA 2 ] after setting the level.
≥ This function's default setting is "100%".
[COLOR BARS]
The color bar convenient for picture quality adjustment of the external monitor can be displayed.
[ON]/[OFF]
[BARS TYPE]
Type of the color bar can be switched.
[TYPE1]
[GUIDE LINES]
You can check if the image is level while recording motion pictures and still pictures. The function can also be used to
estimate the balance of the composition.
[OFF]/[HORIZONTAL]/[GRID1]/[GRID2]
≥ The guidelines do not appear on the images actually recorded.
≥ The setting changes as follows when using Focus Assist.
j The guidelines are not displayed. (They are displayed on the external monitor when this unit is connected to the
external monitor.)
j The setting cannot be changed.
(l
72)
(l
73)
[TYPE2]
- 223 -
(l
51)
(l
73)
Advertisement
Table of Contents
