Table of Contents
Advertisement
[CHAR OUTPUT]
Selects whether or not to superimpose characters on the output image from the HDMI OUT terminal or the SDI OUT
terminal.
[ON]:
Superimposes characters.
[OFF]:
Does not superimpose characters.
≥ Characters are not displayed on the output image from the SDI OUT terminal when [SDI MODE SEL] is set to
[THROUGH].
≥ Characters are not displayed on the output image from the HDMI OUT terminal or the SDI OUT terminal when
[WFM] is set to [ON].
[SDI REMOTE REC]
This enables/disables a function that controls recording performed with an external device connected to the unit.
(l
81)
[TYPE3]/[OFF]
[SDI REMOTE REC LINK]
When [ON] is selected, you can control recording performed with this unit and an external device using the recording
REC/PAUSE button.
(l
[ON]/[OFF]
[29.97p/23.98p OUTPUT]
Allows you to set the external output format of the SDI OUT terminal to be used when the frame rate of the recording
format is 29.97p or 23.98p. It is possible to select PsF or a setting that converts the output frame rate to 59.94i.
≥ Set [SYSTEM FREQ] to [59.94Hz]
[PsF]:
Outputs in 1080/29.97PsF or 1080/23.98PsF.
[over 59.94i]:
Converts and outputs in 1080/59.94i.
≥ When [OUTPUT SEL] is set to a setting other than [SDI], the [29.97p/23.98p OUTPUT] setting can be changed, but
the changed setting cannot be used.
[25.00p OUTPUT]
Allows you to set the external output format of the SDI OUT terminal to be used when the frame rate of the recording
format is 25.00p. It is possible to select PsF or a setting that converts the output frame rate to 50.00i.
≥ Set [SYSTEM FREQ] to [50.00Hz]
[PsF]:
Outputs in 1080/25.00PsF.
[over 50.00i]:
Converts and outputs in 1080/50.00i.
≥ When [OUTPUT SEL] is set to a setting other than [SDI], the [25.00p OUTPUT] setting can be changed, but the
changed setting cannot be used.
82)
- 219 -
Advertisement
Table of Contents
