Table of Contents
Advertisement
User authentication
The unit can be configured to allow access from the internet. To prevent infringement of privacy and personality
rights, information leaks, and other issues concerning unauthorized access by third parties, we recommend
enabling the user authentication function upon installation.
We also recommend using DIGEST authentication when connecting to a device that supports DIGEST authentication.
≥ The AW-RP50, AW-RP120, and AK-HRP200 support DIGEST authentication.
Getting started:
≥ Display the web screen of the Camera Head or the unit by operating the PC connected to the unit
≥ Click [Setup] # [User mng.] to display the user management screen
1
Select [On] for [User auth.].
≥ After selecting, click the [Set] button.
2
(When using a device that supports DIGEST authentication)
Select [Digest] for [Authentication].
≥ After selecting, click the [Set] button.
3
Enter information in the [User name], [Password], and [Retype password] fields to create a
new user name/password.
≥ Select [1. Administrator] for the [Access level].
≥ After entering, click the [Set] button.
4
Delete the default user name from [User check].
≥ Click the [Delete] button after selecting the user name to be deleted ([admin[1]]).
User name and password management
≥ Use a combination of characters and numbers that is difficult to guess.
Avoid using a string of the same characters, such as "11111", birth dates, or telephone numbers.
For information about the types and number of characters that can be entered, refer to [User name [1 to 32 half-size
characters]] in [User management screen [User mng.]].
≥ Change user names and passwords periodically.
≥ Make sure to manage the configured user names and passwords.
≥ Delete all user names that do not have an assigned user.
≥ To prevent third parties from identifying user names and passwords, register new user name information
(user names and passwords) and delete the default user name information.
≥ We recommend creating a password of at least 8 characters, including at least 3 types of characters from
digits (single-byte), uppercase alphabetic characters (single-byte), lowercase alphabetic characters (single-
byte), and special characters.
(l
(l
164)
- 130 -
133, 164).
1
2
3
4
(l
131).
Advertisement
Table of Contents
