Table of Contents
Advertisement
¥ Audio over IP
Audio Transmission
Set the communication mode used to transmit audio data to a personal computer, etc.
Setting value:
Off
Do not transmit audio data. All settings and controls related to audio will be disabled.
On
Transmit audio data. This allows audio as well as images to be viewed on the personal computer.
Factory settings: On
Audio bit rate
Set the bit rate for transmitting audio.
Setting value: 64kbps, 96kbps, 128kbps
Factory settings: 128kbps
∫ Image adjust tab [Image]
Performs the setups regarding the scene file and switch
setup.
≥ Not displayed during SDI Mode.
Scene File
Clicking the [Setup>>] button displays the scene file setup
screen [Scene File].
(l
Switch Setup
Clicking the [Setup>>] button displays the switch setup
screen [Switch Setup].
(l
155)
158)
- 154 -
Advertisement
Table of Contents
