Table of Contents
Advertisement
(When [SYSTEM FREQ] is set to [50.00Hz])
Image capture size
3840k2160
1920k1080
1280k720
640k360
Image quality
Select the image quality for H.264 images.
Setting value:
Motion priority
Image quality priority
Factory settings: Motion priority
≥ This setting is only enabled when [Transmission priority] is set to [Constant bit rate] or [Best effort].
Transmission type
Select the transmission format for H.264 images.
Setting value:
A maximum of 14 users can access a single Camera Head or Recorder at the same time.
When transmitting image/audio from a Camera Head or Recorder, [Unicast port (Image)] and
Unicast port
[Unicast port (Audio)] are automatically set.
(AUTO)
We recommend selecting the [Unicast port (MANUAL)] setting when the port number transmitting
the H.264 images does not need to be fixed (e.g., during use within a network).
A maximum of 14 users can access a single Camera Head or Recorder at the same time.
When transmitting image/audio from a Camera Head or Recorder, it is necessary to set [Unicast
Unicast port
port (Image)] and [Unicast port (Audio)] manually.
(MANUAL)
When transmitting H.264 images via the Internet, configure a fixed transmission port for the
broadband router (hereafter referred to as "router")
instructions for the router.
An unlimited number of users can access a single camera at the same time.
Multicast
When transmitting H.264 images via multicast, enter the [Multicast address], [Multicast port], and
[Multicast TTL/HOPLimit].
Factory settings: Unicast port (AUTO)
≥ For explanation of number of maximum simultaneous access, refer to page 133.
Frame rate
25fps
12.5fps
5fps
50fps
5fps, 12.5fps, 25fps
50fps
5fps, 12.5fps, 25fps
Mode giving priority to image motion.
Mode giving priority to image quality.
- 151 -
H.264 bit rate
51200kbps fixed
40960kbps fixed
32768kbps fixed
16384kbps to 24576kbps
1024kbps to 14336kbps
3072kbps to 14336kbps
512kbps to 8192kbps
512kbps to 4096kbps
(l
166). For details, refer to the operating
Advertisement
Table of Contents
