When Monitoring The Q170Mcpu, Q170Mscpu(-S1) - Mitsubishi Electric GOT2000 Series Connection Manual

■2. Power-On sequence for GOT and Q4ARCPU redundant system
Apply the power to the GOT and Q4ARCPU redundant system in the following sequence.
Step 1.
Turn ON the GOT.
Step 2.
After the monitor screen is displayed on the GOT, turn ON the Q4ARCPU redundant system.
At this time, a timeout is displayed on the system alarm. Use System Information to reset the alarm.
For the system alarm, refer to the following manual:
➠
8.4.15

When monitoring the Q170MCPU, Q170MSCPU(-S1)

Set [CPU No.] to "2" in the device setting to monitor the device of the Motion CPU area (CPU No.2).
When the CPU No. is set to "0" or "1", the device on the PLC CPU area (CPU No.1) is monitored.
When the CPU No. is set to the number other than "0" to "2", a communication error occurs and the monitoring cannot be
executed.
For setting the CPU No., refer to the following manual.
➠
Example) Setting dialog box of the bit device
8.4.16 Troubleshooting
For the troubleshooting, refer to the User's Manual for the GOT you are using.
8 - 46
8.4 Precautions
GT Designer3 (GOT2000) Screen Design Manual
GT Designer3 (GOT2000) Screen Design Manual