Mitsubishi Electric GOT2000 Series Connection Manual page 236

The following diagram shows an example of screen setting using SM1515.
System configuration example: when using one GOT
Create a monitor screen on the base screen 1 that performs the following operations for when connecting a GOT to
control system and standby system.
1) When connecting to the control system, the monitor screen displays a message calling a touch switch operation, by
which the screen switches to the next screen.
2) When connecting to the standby system, the monitor screen displays a message calling the reconnection of the
connection cable.
1) When connecting to the control system
4 - 60
4.2 MELSEC Q Series
GOT
Control
Q25PRH QJ71
system
CPU BR11
(System A)
Standby
Q25PRH
Station
system
CPU
No. 0
(System B)
QJ72
Station
BR15
No. 2
2) When connecting to the standby system
Station
QJ71
No. 1
BR11