Connecting To Display I/F - Mitsubishi Electric GOT2000 Series Connection Manual

5.2.3

Connecting to Display I/F

PLC CPU
PLC
Communication
Model name
type
CNC C70
Ethernet
*3*4
(Q173NCCPU)
CNC C80
(R16NCCPU-S1)
Ethernet
*5
*1
*2
*3
*4
*5
*6
5 - 16
5.2 System Configuration
CNC
C70/C80
Connection cable
*1
Connection cable
• 100BASE-TX
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 5 or higher
• 10BASE-T
Shielded twisted pair cable (STP) or
unshielded twisted pair cable (UTP) of
category 3 or higher
The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable Ethernet network
system.
Use cables, connectors, and hubs that meet the IEEE802.3 10BASE-T/100BASE-TX standard.
A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
For the system configuration of the CNC C70, refer to the following manual.
➠
C70 Series SET UP MANUAL
Select [Q17nNC] for [Controller Type] in [Ethernet] of GT Designer3.
For [Ethernet] of GT Designer3, refer to the following.
➠
5.3.4 Ethernet setting
Select [RnNCCPU] for [Controller Type] in [Ethernet] of GT Designer3.
For [Ethernet] of GT Designer3, refer to the following.
➠
5.3.3 GOT Ethernet Setting
GT25-W, GT2505-V does not support the option device.
GOT
GOT
Maximum
segment
*6
Option device
*3
length
- (Built into GOT)
100m
GT25-J71E71-100
- (Built into GOT)
100m
GT25-J71E71-100
Communication driver
Ethernet(MELSEC),Q17nNC,
CRnD-700,Gateway
Number of
connectable
Model
equipment
16 GOTs for 1
network
8 GOTs for 1 network