HP 10500 SERIES Configuration Manual page 52

Step
4. Enable the IPv6
capacity for the IS-IS
process.
5. Redistribute the VPN
routes.
6. Configure a filtering
policy to filter
redistributed routes.
7. Return to system view.
8. Enter interface view.
9. Enable IPv6 for the IS-IS
process on the
interface.
Configuring EBGP between IPv6 MCE and PE
Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 BGP-VPN
instance view.
4. Configure the PE as the
EBGP peer.
5. Redistribute the VPN
routes.
6. Configure a filtering
policy to filter the routes
to be advertised.
7. Configure a filtering
policy to filter the
received routes.
NOTE:
IPv6 BGP runs within a VPN in the same way as it runs within a public network. For more information
about IPv6 BGP, see
Command
ipv6 enable
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 |
level-1-2 | level-2 ] | route-policy
route-policy-name | tag tag ] *
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } export
[ protocol [ process-id ] ]
quit
interface interface-type interface-number
isis ipv6 enable [ process-id ]
Command
system-view
bgp as-number
ipv6-family vpn-instance vpn-instance-name
peer ipv6-address as-number as-number
import-route protocol [ process-id [ med
med-value | route-policy
route-policy-name ] * ]
filter-policy { acl6-number | ipv6-prefix
ip-prefix-name } export [ direct | isisv6
process-id | ripng process-id | static ]
filter-policy { acl6-number | ipv6-prefix
ip-prefix-name } import
Layer 3—IP Routing Configuration Guide
Remarks
Disabled by default.
Optional.
By default, IS-IS does not
redistribute routes of any other
routing protocol.
If you do not specify the route level
in the command, the command will
redistribute routes to the level-2
routing table by default.
Optional.
By default, IPv6 IS-IS does not filter
redistributed routes.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
N/A
By default, no route
redistribution is configured.
Optional.
By default, BGP does not filter
the routes to be advertised.
Optional.
By default, BGP does not filter
the received routes.
.