HP 10500 SERIES Configuration Manual page 41

[MCE1-vpn-instance-vpn2] vpn-target 1:3
[MCE1-vpn-instance-vpn2] quit
# Bind VLAN-interface 10 and Tunnel0 with VPN instance vpn1, and configure IP addresses for
the VLAN interface and tunnel interface.
[MCE1] vlan 10
[MCE1-vlan10] port gigabitethernet 1/0/10
[MCE1-vlan10] quit
[MCE1] interface vlan-interface 10
[MCE1-Vlan-interface10] ip binding vpn-instance vpn1
[MCE1-Vlan-interface10] ip address 10.214.10.1 24
[MCE1-Vlan-interface10] quit
[MCE1] interface tunnel 0
[MCE1-Tunnel0] ip binding vpn-instance vpn1
[MCE1-Tunnel0] ip address 10.1.1.1 24
# Bind VLAN-interface 11 and Tunnel1 with VPN instance vpn2, and configure IP addresses for
the VLAN interface and tunnel interface.
[MCE1] vlan 11
[MCE1-vlan11] port gigabitethernet 1/0/11
[MCE1-vlan11] quit
[MCE1] interface vlan-interface 11
[MCE1-Vlan-interface11] ip binding vpn-instance vpn2
[MCE1-Vlan-interface11] ip address 10.214.20.1 24
[MCE1-Vlan-interface11] quit
[MCE1] interface tunnel 1
[MCE1-Tunnel1] ip binding vpn-instance vpn2
[MCE1-Tunnel1] ip address 10.1.2.1 24
[MCE1-Tunnel1] quit
Configure VPN instances on MCE 2:
3.
# Create VPN instance vpn1 for VPN 1, and configure the same RD as that configured on MCE 1
for the VPN instance.
<MCE2> system-view
[MCE2] ip vpn-instance vpn1
[MCE2-vpn-instance-vpn1] route-distinguisher 1:2
[MCE2-vpn-instance-vpn1] vpn-target 1:2
[MCE2-vpn-instance-vpn1] quit
# Create VPN instance vpn2 for VPN 2, and configure the same RD as that configured on MCE 1
for the VPN instance.
[MCE2] ip vpn-instance vpn2
[MCE2-vpn-instance-vpn2] route-distinguisher 1:3
[MCE2-vpn-instance-vpn2] vpn-target 1:3
[MCE2-vpn-instance-vpn2] quit
# Bind VLAN-interface 20 and Tunnel 0 with VPN instance vpn1, and configure IP addresses for
the VLAN interface and tunnel interface.
[MCE2] vlan 20
[MCE2-vlan20] port gigabitethernet 1/0/20
[MCE2-vlan20] quit
[MCE2] interface vlan-interface 20
33