HP 10500 SERIES Configuration Manual page 168

[CE1] ping 192.168.2.2
PING 192.168.2.2: 56
Reply from 192.168.2.2: bytes=56 Sequence=1 ttl=253 time=61 ms
Reply from 192.168.2.2: bytes=56 Sequence=2 ttl=253 time=54 ms
Reply from 192.168.2.2: bytes=56 Sequence=3 ttl=253 time=53 ms
Reply from 192.168.2.2: bytes=56 Sequence=4 ttl=253 time=57 ms
Reply from 192.168.2.2: bytes=56 Sequence=5 ttl=253 time=36 ms
--- 192.168.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 36/52/61 ms
[CE2] ping 192.168.1.2
PING 192.168.1.2: 56
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=253 time=38 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=253 time=61 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=253 time=74 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=253 time=36 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=253 time=35 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 35/48/74 ms
The output shows that CE 1 and CE 2 can reach each other.
Verify the configuration:
7.
# Execute the display mpls lsp verbose command on PE 1.
[PE1] display mpls lsp verbose
------------------------------------------------------------------
------------------------------------------------------------------
No
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Tunnel ID
LsrType
Bypass In Use
BypassTunnel
Mpls-Mtu
------------------------------------------------------------------
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
LSP Information: RSVP LSP
: 1
: 2.2.2.2
: 1
: Tunnel1
: 3.3.3.3/32
: 10.0.0.2
: NULL
: 1024
: ----------
: Vlan-interface2
: 2050
: 0x22004
: Ingress
: Not Exists
: Tunnel Index[---]
: 1500
160