Configuring Routing Features For The Bgp-Vpnv6 Subaddress Family - HP 10500 SERIES Configuration Manual

Step
6. Enable the exchange of
BGP-VPNv6 routing
information with the specified
peer.
Configuring routing features for the BGP-VPNv6 subaddress
family
A variety of routing features for the BGP-VPNv6 subaddress family are the same as those for BGP IPv6
unicast routing. You can select any of the features as required.
To configure routing features for the BGP-VPNv6 subaddress family:
Step
1. Enter system view.
2. Enter BGP view.
3. Configure the remote PE as
the peer.
4. Specify the interface for TCP
connections.
5. Enter BGP-VPNv6 subaddress
family view.
6. Set the default value of the
local preference.
7. Set the default value for the
system MED.
8. Configure a filtering policy to
filter routes to be advertised.
9. Configure a filtering policy to
filter received routes.
10. Apply a filtering policy for the
peer.
11. Apply an IPv6-prefix list for
the peer to filter
received/advertised routes.
12. Specify the preference value
for the routes received from
the peer.
Command
peer ip-address enable
Command
system-view
bgp as-number
peer ip-address as-number
as-number
peer ip-address connect-interface
interface-type interface-number
ipv6-family vpnv6
default local-preference value
default med med-value
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ direct | isisv6 process-id |
ripng process-id | static ]
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
import
peer ip-address filter-policy
acl6-number { export | import }
peer ip-address ipv6-prefix
prefix-name { export | import }
peer ip-address preferred-value
value
356
Remarks
By default, BGP peers exchange
only IPv4 routing information.
Remarks
N/A
N/A
N/A
N/A
N/A
Optional.
100 by default.
Optional.
By default, the default value of the
system MED is 0.
Optional.
By default, the PE does not filter
routes to be advertised.
Optional.
By default, the PE does not filter
received routes.
Optional.
By default, no filtering policy is
applied for a peer.
Optional.
By default, no IPv6 prefix list is
applied for a peer.
Optional.
0 by default.