Configuring Congestion Control And Security Policies - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Set the service attributes based on the data plan:
l For the OLT, set the SVLAN ID to 300, CVLAN ID to 300 which is the same as the upstream
VLAN ID of the ONU, and GEM port ID to 12 for the Layer 2 interoperation service.
l For ONUs, set the upstream VLAN ID to 300.
huawei(config)#service-port 301 vlan 300 gpon 0/3/1 ont 1 gemport 12 multi-
service
user-vlan 300 rx-cttr 10 tx-cttr 10
huawei(config)#service-port 302 vlan 300 gpon 0/4/1 ont 2 gemport 12 multi-
service
user-vlan 300 rx-cttr 10 tx-cttr 10
Step 4 Configure attributes for protocol transparent transmission.
Create a VLAN service profile, enable the VLAN Layer 2 interoperation function, and configure
attributes for protocol transparent transmission. Then, bind the profile to VLAN 300. For details
on data planning for protocol transparent transmission, see
Transparent Transmission Data
huawei(config)#vlan service-profile profile-id 1
huawei(config-vlan-srvprof-1)#user-bridging enable
huawei(config-vlan-srvprof-1)#bpdu tunnel enable
huawei(config-vlan-srvprof-1)#ospf tunnel enable
huawei(config-vlan-srvprof-1)#rip tunnel enable
huawei(config-vlan-srvprof-1)#vtp-cdp tunnel enable
huawei(config-vlan-srvprof-1)#commit
huawei(config-vlan-srvprof-1)#quit
huawei(config)#multicast-unknown policy service-port 301 transparent
huawei(config)#multicast-unknown policy service-port 302 transparent
huawei(config)#vlan bind service-profile 300 profile-id 1
----End

12.4.3.5 Configuring Congestion Control and Security Policies

This topic describes how to configure global priority-based scheduling policies for upstream
queues to ensure service reliability and configure global security policies to ensure service
security.
Context
Congestion control uses queue scheduling technology to map packets sent from the same port
into multiple queues and process packets in each queue based on priority. Congestion control is
recommended.
Security policies cover system security, user security, and service security, which ensure normal
running of services.
NOTE
l You are advised to enable the service security feature according to service types. For details, see
Principle of Security Data
l The configuration of the system security, user security, and service security introduced in this topic is on
the OLT side. The configuration on the ONU side is through the web and is simple, here we do not introduced
it.
Procedure
l
Issue 01 (2014-04-30)
Plan.
Configure queue scheduling.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 FTTO Configuration(SOHO and SME)
Plan.
13.2.4 Principle of Protocol
//Mandatory
13.2.5
1242