Enterprise Ip Pbx Private Line Access Service; Service Requirement And Application Scenario - Huawei SmartAX MA5603T Configuration Manual

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Loopb
ack
Mode
Remote
loopba
ck on
the
ONU

13.3.3 Enterprise IP PBX Private Line Access Service

ONUs provide GE/FE ports to access IP private branch exchange (PBX) services of an enterprise
and transmit them to an OLT. Then, the OLT forwards the service data upstream to the packet
switched network (PSN). This achieves unified carrying of voice, data, and video services.

13.3.3.1 Service Requirement and Application Scenario

Service Requirement
l
l
Application Scenario
As shown in
transparently transmits the data to the IP network in QinQ mode.
Applicable ONUs: MA5612, MA5628, MA5616
Figure 13-8 Networking diagram of the IP PBX access service
Issue 01 (2014-04-30)
Function
Loops back
signals to the
user side on the
ONU. This
loopback checks
whether the link
between the
ONU and user
terminal is
normal.
The IP private branch exchange (PBX) data can be transparently transmitted on the PON
network.
The operation method for end users connected to the IP PBX is not changed.
Figure 13-8, ONUs access IP PBX services through FE/GE ports. The OLT
IP PBX
ONU
ONU
IP PBX
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 FTTO Configuration (Large-sized Enterprise Access)
Networking
E1 line
ONU
tester
E1
Remote loopback
OLT
Splitter
Configuration
huawei(config)#interface
OLT
tdm
huawei(config-if-tdm-)
#loopback 0 remote
huawei(config-if-tdm-)
#undo loopback 0
IP network
GE/10GE
NGN/IMS
1299